Omunuo Electric Heating Electric Co.,LTD
Humanist · Technical Innovation
400-8872908
800-8682188
Phone
wechat
X5.716 Series
Introduction:
With a weekly cycle, the heating room temperature controller can be set for 6 periods of time and corresponding set temperature every day, and the operation mode of manual control or time period control can be selected. Suitable for electric heating equipment control and electric drive valve control of water system heating.
Technical parameters:
Voltage: see product label
Power: 2 w
Temperature control range: 5-95℃ (adjustable upper limit: 35℃-95℃)
External limit range: 5-60℃ (factory 35℃)
Temperature switch deviation: 0.5-10℃ adjustable, factory ±1℃
Ambient temperature: -5-50℃
Protection level: IP20
Shell material: flame retardant PC
WK829 Series
Introduction:
WK829 series hidden thermostat, is a large LCD programmable thermostat, through the keyboard to set the room required temperature. Thermostat automatically opens or closes the heating load according to the set temperature, thus achieving the purpose of adjusting room temperature.
Features:
1. Split-type installation structure, large terminal, easy installation
2. The large screen is fully displayed in Chinese, with programming temperature control during the 7-day period
3. Built-in continuous load protection function
4. Built-in anti-freeze function
5. Memory function of power failure
6. Administrator interface function
7. Temperature calibration and temperature upper limit
8. Load protection time setting
Technical Parameters：
TMPOW High Power Output Driver
Introduction:
TMP0W is a high power output driver for electric heating, which is used in conjunction with the thermostat and is directly driven by 220V ac. It can expand the output power to 5500-6500w, thus improving the output power of a single thermostat, suitable for large area heating needs.
Stealth installation model
External Sensor:
TMPOW TMPOW AC220V±10% 4500（4500）W Power Dvelopment
External installation model
Work voltage
Load power Typical
Applications
Technical Parameters：
Breeding Thermostats
Brief introduction:
Aquiculture special waterproof thermostat is the latest research and development of the earth temperature thermostat, mainly suitable for the breeding room, nursery, indoor and other harsh environment of the electrical heating equipment controller. The appearance of the thermostat is made of high corrosion resistant plastic, protection class is IP65. Digital tube small screen display, no need of type 86 cartridges, can be installed directly. Its working principle is to set the temperature controller through the special remote control, with the data collected by the ground sensor to control the thermostat on and off, to achieve the purpose of heating.
Instructions:
This product is specially designed for breeding users. It can be used in humid environment, but not immersed in water. When in use, put the probe wire into the buried wire tube and place it where temperature measurement is needed. Do not directly bury the probe into cement mortar.
Technical Parameters:
● temperature setting range: 5 ~ 60℃ (customizable)
● temperature measurement range: 0 ~ 99℃
● temperature control accuracy: ±1℃
● temperature controlled tolerance: -3℃ (customizable)
● output mode: relay
● native power consumption: active power consumption <2W
● power supply voltage: 220V±10% 50Hz
● rated load: 1000W
● maximum current: 5A
● overall size: 116.5mm * 86mm
● mounting hole spacing: 104.5mm
Operating Instructions:
This machine is set by remote control. When operating, please direct the remote control to the thermostat within 50cm to ensure that the operation is sensitive and will not affect the adjacent thermostat.
Press the "on" key to switch the machine state. Under startup state, the current measured temperature will be displayed during normal operation; In shutdown state, "OF" is displayed.
● on the state: press the up and down keys to adjust the setting temperature, the key to determine the setting temperature and save exit. (range: 5 ~ set upper temperature limit)
● off state: long press the key for 8 seconds to enter the temperature control tolerance adjustment mode. Press the up and down keys to adjust the temperature control tolerance. Open key to determine the current temperature tolerance, and save exit. (adjustment range 1 ~ 9)
● off state: long press the up button for 8 seconds to enter the setting temperature upper limit adjustment mode. Press the up and down keys to set the upper temperature limit. Open key to determine the current set temperature upper limit, and save exit. (adjustment range 6 ~ 85)
● off state: long press the down button for 8 seconds to enter the temperature correction mode. Press the up and down keys to adjust the temperature correction. Open key to determine the current temperature correction, and save exit. (adjustment range -9 ~ 9)
Wiring Mode:
This machine is set by remote control. When operating, please direct the remote control to the thermostat within 50cm to ensure that the operation is sensitive and will not affect the adjacent thermostat.
Fault Diagnosis:
Display "FF" at startup and flash: probe off.
On - up state, display "oo", and flicker: probe short circuit.
Notes:
Use according to the rated current. Overloading is strictly prohibited.
Wiring in strict accordance with electrical standards.
|
|
Add. : Room 158, Zone C, 1st Floor, Building 1, No.1218, Xinda Road,
Qingpu District, Shanghai,China.
Sales Company
Add. : 4th floor, Building 12, Zhongyi Electronic Information Industry Park,
Heli Park, Economic Development Zone, Ningguo City, Anhui Province,China
Production Center
Tel : +86 400-887 2908 / +86 800-868 2188
Tel : +86-563-4180559
Technical consult：+86 181 1085 8458
Fax : +86-563-4185828
E-mail : omunuo@163.com
Phone web